Name: Effect of Amine-Functionalized GO on CFRP Mechanical Properties (en Inglés)
SKU: 66209134
Price: 68.15 USD
Availability: InStock
Author: Nethula, Arun; Tirumani, V. Dharmaraju
ISBN: 9786208471583

portada Effect of Amine-Functionalized GO on CFRP Mechanical Properties (en Inglés)

Effect of Amine-Functionalized GO on CFRP Mechanical Properties (en Inglés)

Formato

Libro Físico

Editorial

LAP Lambert Academic Publishing

Autor

Nethula, Arun; Tirumani, V. Dharmaraju

Idioma

Inglés

N° páginas

Encuadernación

Tapa Blanda

Dimensiones

22.9x15.2x0.4 cm

ISBN13

9786208471583

Effect of Amine-Functionalized GO on CFRP Mechanical Properties (en Inglés)

Nethula, Arun; Tirumani, V. Dharmaraju (Autor) · LAP Lambert Academic Publishing · Tapa Blanda

Libro Nuevo Importado

Envío: 26 a 33 días háb.

$ 113.59$ 68.15

-40%

Costos de importación incluídos en el precio ✅

Libro Nuevo

Quedan 10 unidades

$ 68.15

Llega entre el 06 Oct y el 20 Oct a Quito, Pichincha. Seleccionar ubicación

Agregar a lista de deseos

Reseña del libro "Effect of Amine-Functionalized GO on CFRP Mechanical Properties (en Inglés)"

Fiber Reinforced Polymer (FRP) composites have been employed widely in the last ten years to create lightweight constructions, particularly under critical loading circumstances due to its high strength-to-weight ratio. However, the brittleness of the matrix materials and the inadequate adhesion at the fiber-matrix interface caused the composite structures to break early. To encounter these issues, attempts were made to reinforced functionalized graphene oxide nanosized particles at the fiber-matrix interface. So, in the present work, carbon fiber with amine functionalized Graphene Oxide (AGO) with varying content (0 wt%, 0.25 wt%, 0.5 wt% and 1 wt%) was reinforced into epoxy resin to prepare the composites samples using hand lay-up cum compression molding process. The air bubbles from the Nano resin mixture were removed using vacuum pump. The prepared samples were tested as per ASTM Standards under Tension, Bending and impact loading conditions. There is expected to enhance all the mechanical properties at particular wt. % of GO in the selected range. Further, fractography analysis of best tensile sample was analyzed using SEM to understand the failure mechanism of composites.