Name: Influence of Cutting Parameters in Drilling Operations (en Inglés)
Price: 53.39 USD
Availability: InStock
Author: Sastry, Susarla Venkata Ananta Rama ; Sastry, Susarla Venkata Yagneshwar
ISBN: 9783330056169

portada Influence of Cutting Parameters in Drilling Operations (en Inglés)

Influence of Cutting Parameters in Drilling Operations (en Inglés)

Formato

Libro Físico

Autor

Susarla Venkata Ananta Rama Sastry

Susarla Venkata Yagneshwar Sastry

Editorial

LAP Lambert Academic Publishing

Idioma

Inglés

N° páginas

Encuadernación

Tapa Blanda

Dimensiones

22.9 x 15.2 x 0.5 cm

Peso

0.14 kg.

ISBN13

9783330056169

Categorías

Tecnología: cuestiones generales

Influence of Cutting Parameters in Drilling Operations (en Inglés)

Susarla Venkata Ananta Rama Sastry (Autor) · Susarla Venkata Yagneshwar Sastry (Autor) · LAP Lambert Academic Publishing · Tapa Blanda

Libro Nuevo Importado

Envío: 25 a 32 días háb.

$ 97.08$ 53.39

-45%

Costos de importación incluídos en el precio ✅

Libro Nuevo

Quedan 10 unidades

$ 53.39

Llega entre el 25 Ago y el 07 Sep a Quito, Pichincha. Seleccionar ubicación

Agregar a lista de deseos

Reseña del libro "Influence of Cutting Parameters in Drilling Operations (en Inglés)"

Drilling is a cutting process that uses a drill bit to cut or enlarge a hole of circular cross-section in solid materials. The drill bit is pressed against the work piece and rotated at rates from hundreds to thousands of revolutions per minute. This forces the cutting edge against the work piece, cutting off chips from the hole as it is drilled. Drilling operations are conducted on the E Glass epoxy fiber reinforced pieces with 12 mm and 8 mm diameter drills with 118 deg. and 120 deg. point angles with different cutting parameters. The cutting parameters are spindle speed - 1000 rpm and 2500 rpm, Feed - 0.2 mm/rev for 8 mm drill tool and 0.35 mm/rev for 12 mm drill tool. Cutting tool material is HSS. Forces are calculated using theoretical calculations. 3D modeling is done in Creo 2.0 and analysis is done in Ansys. Analysis is performed and the stresses, displacements are compared for three materials Aluminum, Titanium alloy and E Glass Epoxy. By observing the analysis results, the stresses and displacements are less for E Glass Epoxy than Aluminum alloy and Titanium. This book will be especially useful for Mechanical & Metallurgical Engineers.