Name: Investigation and Optimisation of the Yarn Tension on Open-End Weaving Mills (en Inglés)
Price: 46.58 USD
Availability: InStock
Author: H Y Rasulov; S S Rakhimkhodjaev
ISBN: 9786208367039

portada Investigation and Optimisation of the Yarn Tension on Open-End Weaving Mills (en Inglés)

Investigation and Optimisation of the Yarn Tension on Open-End Weaving Mills (en Inglés)

Formato

Libro Físico

Editorial

Our Knowledge Publishing

Autor

H Y Rasulov; S S Rakhimkhodjaev

Idioma

Inglés

N° páginas

Encuadernación

Tapa Blanda

ISBN13

9786208367039

Investigation and Optimisation of the Yarn Tension on Open-End Weaving Mills (en Inglés)

H Y Rasulov; S S Rakhimkhodjaev (Autor) · Our Knowledge Publishing · Tapa Blanda

Libro Nuevo Importado

Envío: 17 a 23 días háb.

$ 93.15$ 46.58

-50%

Costos de importación incluídos en el precio ✅

Libro Nuevo

Quedan 50 unidades

$ 46.58

Llega entre el 13 Ago y el 25 Ago a Quito, Pichincha. Seleccionar ubicación

Agregar a lista de deseos

Reseña del libro "Investigation and Optimisation of the Yarn Tension on Open-End Weaving Mills (en Inglés)"

The work is devoted to the research and optimization of thread tension on the shuttleless weaving machines during the production of shirt fabrics. On the basis of the theory of wave propagation in elastic medium it is established that the cause of weft thread breaks is the impact of the brake foot on the weft thread, at increasing the laying speed, the deformation and tension of the weft thread increase on average by 30% and at increasing the coefficient of friction of the thread on the surface of the laying mechanisms, the tension and deformation of the weft thread decrease by 19%. A new system of weft braking and feeding is developed and tested. Regularities of change in the tension of the weft depending on the friction radius, friction angle, friction coefficient, stiffness of the weft and compensator position have been obtained. A stand and methodology for determining the friction coefficient in the compensator eye, depending on the friction radius, type and linear density of yarn, type of the compensator working surface have been developed. Theoretical expert studies of warp tension for the existing and new system were carried out, where the feasibility of using the new system of regulating the warp tension per machine cycle was shown.