portada Measurements with a Split-Fiber Probe in Complex Unsteady Flows (en Inglés)

Measurements with a Split-Fiber Probe in Complex Unsteady Flows (en Inglés)

Formato

Libro Físico

Autor

Nasa Technical Reports Server (Ntrs)

Jan Lepicovsky

Editorial

Bibliogov

Idioma

Inglés

N° páginas

Encuadernación

Tapa Blanda

Dimensiones

24.6x18.9x0.1 cm

Peso

0.06 kg.

ISBN13

9781289265267

Categorías

Política y gobierno

Measurements with a Split-Fiber Probe in Complex Unsteady Flows (en Inglés)

Nasa Technical Reports Server (Ntrs) (Autor) · Jan Lepicovsky (Autor) · Bibliogov · Tapa Blanda

Libro Nuevo Importado

Envío: 20 a 27 días háb.

$ 55.47$ 27.74

-50%

Costos de importación incluídos en el precio ✅

Libro Nuevo

Quedan 100 unidades

$ 27.74

Llega entre el 17 Sep y el 30 Sep a Quito, Pichincha. Seleccionar ubicación

Agregar a lista de deseos

Reseña del libro "Measurements with a Split-Fiber Probe in Complex Unsteady Flows (en Inglés)"

A split-fiber probe was used to acquire unsteady data in a research compressor. A calibration method was devised for a split-fiber probe, and a new algorithm was developed to decompose split-fiber probe signals into velocity magnitude and direction. The algorithm is based on the minimum value of a merit function that is built over the entire range of flow velocities for which the probe was calibrated. The split-fiber probe performance and signal decomposition was first verified in a free-jet facility by comparing the data from three thermo-anemometric probes, namely a single-wire, a single-fiber, and the split-fiber probe. All three probes performed extremely well as far as the velocity magnitude was concerned. However, there are differences in the peak values of measured velocity unsteadiness in the jet shear layer. The single-wire probe indicates the highest unsteadiness level, followed closely by the split-fiber probe. The single-fiber probe indicates a noticeably lower level of velocity unsteadiness. Experiments in the NASA Low Speed Axial Compressor facility revealed similar results. The mean velocities agreed well, and differences in the velocity unsteadiness are similar to the case of a free jet. A reason for these discrepancies is in the different frequency response characteristics of probes used. It follows that the single-fiber probe has the slowest frequency response. In summary, the split-fiber probe worked reliably during the entire program. The acquired data averaged in time followed closely data acquired by conventional pneumatic probes.