Name: quick and easy stirling engine (en Inglés)
Price: 21.68 USD
Availability: InStock
Author: Larsen, Jim R.
ISBN: 9781466277779

portada quick and easy stirling engine (en Inglés)

Formato

Libro Físico

Autor

Jim R. Larsen

Editorial

Createspace Independent Publishing Platform

Idioma

Inglés

Encuadernación

Tapa Blanda

Dimensiones

22.9 x 15.2 x 0.3 cm

Peso

0.08 kg.

ISBN

1466277777

ISBN13

9781466277779

Categorías

Ciencias matemáticas

quick and easy stirling engine (en Inglés)

Jim R. Larsen (Autor) · Createspace Independent Publishing Platform · Tapa Blanda

Libro Nuevo

$ 21.68

$ 43.35

Ahorras: $ 21.68

50% descuento

Envío normal

Origen: Estados Unidos (Costos de importación incluídos en el precio)

Se enviará desde nuestra bodega entre el Lunes 01 de Julio y el Lunes 15 de Julio.

Lo recibirás en cualquier lugar de Ecuador entre 1 y 3 días hábiles luego del envío.

Reseña del libro "quick and easy stirling engine (en Inglés)"

Do you know how to make a working engine from soda cans? You do now! The Quick and Easy Stirling Engine book will show you every detail you need to know. There are no difficult secrets and no expensive parts to buy. With two soda cans and a few other materials you can build a running engine in just a few hours.The engine featured in this book was designed for use in educational settings. Consulting with several educators, this engine was designed so that it could be assembled with simple hand tools by most builders in about three hours. The parts list is simple and affordable. Simple hand tools are all that is required for assembling this engine.Once assembled, the engine will spin a flywheel when the bottom is heated and ice is placed on top. This is a hot air engine design, sometimes referred to as a Stirling Engine. The engine makes motion by exercising a temperature differential. The bottom half of the engine must be warmed to about 250 degrees F, and the top of the engine must be cooled with cold water or ice. When these conditions are present, the engine will spin between 100 and 200 rpm.The primary components of this engine are soda cans, copper wire, and an old CD. The adhesive that is used for construction is readily available at hardware stores. This engine is a fun project for students, home builders, hobbyists, and anyone who wants to learn how to make their own hot air engine from soda cans.